If you are not seeing these from your cameras output you may need to upgrade the firmware of your camera. If you need to know what the cameras HDMI or SDI is outputting it is designated by the rotary dial on the back of the camera.
Those resolutions will not work over SDI unless you use a framerate converter to change the 3G Level A signal from the cameras to the Level B signal the ATEM is looking for. The PTZ Optics cameras will pull through if you set that to any resolution aside from 1080p60, 1080p59.p50. Now you should get an option to set your Video Standard.First, go to the "gear" in the bottom left.This is how you control your ATEM Television Studio. You should be prompted to put you your IP address, just use all the information from the ATEM setup utility and connect to your device. Keep that open, and go into your Blackmagic Design All programs folder, and run your ATEM Control Software. Go to ATEM switchers and run the ATEM setup utility.Īs long as your device is connected to your PC with a USB cable, you should see your device's IP address.Once you get the latest update, go to Start > All Apps > Blackmagic Design.Download the latest software for your device from Blackmagic Design ( ).Connect a USB cable from the USB 2.0 connection on your ATEM device to your PC.Connect it to your network with a standard cat5e cable, and.
Please keep in mind when setting up your ATEM, you will not get an image out of the device if the resolution and framerate settings are not the same on both your camera, and your ATEM. The ATEM Television Production Studio is an entry level hardware piece that takes the place of an actual TV studio. The cameras are compatible with Blackmagic ATEM.
Solution home PTZOptics 3rd-Party Integration Are your Cameras Compatible with the Blackmagic ATEM Television Studio?
0 kommentar(er)
